H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Lane Departure Warning System

vehicle is once again fully within the lane markings. Switching the SystemOn and Off When the ignition is turned ON, LDWS will be automatically active unless there is no error. To switch off, press the LDWS button . Then, LDWS warning lamp will light up constantly on the instrument cluster. To switch the system back on, press the LDWS button once again and visually verify that LDWS warning lamp on the instrument cluster turns off. The system is configured to warn on unintended lane departures only. Driver's awareness of the situation is monitored via driver inputs listed below. If these driver inputs explicitly show that there is an attentive driver, lane departure warnings are suppressed. • Rate of lane departure, i.e.how fast is the lane being departed • Brake pedal usage • Steering wheel turning rate, i.e.how fast the steering wheel is turned • Direction indicator activation for the side lane being departed

Note: If the left / right turn signals are active for a minute longer, these signals will not prevent the system from giving a warning

4

LDWS icon on cluster display Warnings consist of audible and visual warnings with spatial indication about the direction of unintended drift of the vehicle. In order to make the warning more audible, systemmutes radio and stops the blowers of air conditioning system until the end of the warning. • If unintended lane departure is detected from left lane marking, LDWS page, shown in the figure above, will pop up with a blinking left lane marking, a blinking LDWS warning lamp and an intermittent warning sound coming from left hand side will be activated. • If unintended lane departure is detected from right lane marking, LDWS icon shown above will pop-up with a blinking right lane marking, a blinking LDWS warning lamp and an intermittent warning sound coming from right hand side will be activated. Once LDWS has issued a warning, further warnings will only be issued when the

LDWS on/off switch

Note: In case camera vision is obstructed, driver may get below message on the cluster display.

Front Camera Low Visiblity Clean Screen

Note: The message above is a clear indication that the sensor view is obstructed in a way that LDWS operation is negatively affected.

- 133 -

Made with FlippingBook - Online Brochure Maker