H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION USE

• You have made an excellent choice by purchasing a Ford Trucks vehicle. Congratulations. • Please consider the following points and read this manual to obtain best performance and service life from your vehicle. 1. Air and oil filters • Replace the air filter element when air filter warning light is illuminated inside the cab. Always refer to the warranty and service manuals for the main filter element replacement intervals. • Use oil and air filters approved by Ford Otomotiv Sanayi only. 2. Adding oil • Do not add oil until the oil level is reduced to min.line. • Never add oil over the max.line. • Add oil to the engine when the oil level warning light is illuminated. 3. Engine • Your vehicle is equipped with a system that prevents starting of the engine while transmission is shifted to a gear. • Always observe starting instructions provided in the manual

• Do not increase the engine speed until oil pressure is increased after starting. • We advise you to operate your vehicle in the green zone tachometer to obtain best traction. (1050-1600 rpm) • Operate your engine at idle for 1 minutes before stopping the engine in order to allow continued lubrication of the turbocharger unit. • We advise you to use the vehicles with automated transmissions in automatic mode as much as possible. 4. Injector pump • Injector pump available in your vehicle is completely adjusted and sealed in factory. • Do not let tampering of injector pump by any other workshops other than authorized dealerships. 5. Wheel nuts • Have the wheel nuts tightened to the specified torque values after 500 km from the first loading point of your vehicle. This operation should be repeated after each nut removal. (750 +-50Nm)

4 4

- 141 -