H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION USE

When your engine has been idling for a long time, smart engine off system warns you 30 seconds before turning off the engine and informs you about the fact that the engine is being turned off when a predefined time period has expired in idle with the smart engine off feature. All you need to do to prevent engine from being turned off is to press any of the clutch, brake or accelerator pedals within this period. Thus, you shall deactivate this feature until you restart the engine when you do not want your engine to be turned off. Other conditions when this feature is automatically deactivated is as follows: • When engine speed control applications (for example: PTO) are operated • When the park brake is not applied • When DPF regeneration is activated • This feature would provide significant fuel saving and you shall enjoy the privilege of being a Ford Trucks owner.

You may increase or decrease the idling speed using speed control buttons when your vehicle is stationary. All you need to do is to bring the speed control handle to "resume" position and to activate this feature. After that, you shall simply decide at what speed the engine will run using "Set +" or "Set -" buttons. You may also use this feature in PTO applications, too. Thus, you can set the engine speed to the optimum point in various load conditions and obtain the highest efficiency from the PTO. PTO applications are used in mixer vehicles, concrete pumps and in many other similar vehicles today. It is very easy to operate or turn off the engine or control the engine speed remotely by a remote control with a similar special applications in vehicles such as concrete pump. Thus, remote operation is possible without requiring the operator to work inside the vehicle. In emergency conditions, you may deactivate the engine speed control by using the "off' position in speed control or by pressing the clutch or brake pedal as specific to application.

4

- 143 -