H476-USER MANUAL-FULL BOOK-ENGLISH

MAINTENANCE AND SERVICE

Tires and Rims

Spare Wheel and Tire Replacement

Jacking The Vehicle Jack can be mechanically geared type or hydraulic type. Before lifting the vehicle, park the vehicle on a level ground and apply the park brake. If the vehicle is on a slope and it is to be lifted without applying the parking brake, chock all other wheels. The jack should be placed under the leaf spring as shown in the figure and must be placed on the ground firmly. CAUTION lf you need to get under a vehicle lifted by a jack, provide additional support under the frame pedestals. There may not be enough space under the front axle while replacing a flat tire. Place the jack under the leaf springs on the closest point to the axle when there is not enough space. Pay attention not to damage the steering linkages while lifting the vehicle with a jack. Use wooden blocks if required. Check for an obstacle under the vehicle when lowering the vehicle.

Do not jack the vehicle from the chassis arms.

5

Spare wheel is on the chassis on your vehicle Carefully lower the spare tire. Take necessary precautions to prevent the tire from falling over your foot. It can be moved to any position on the vehicle by the vehicle owner when the upper structure will be installed. Remove the Upper Spare Bracket before attaching a trailer to your vehicle.

On vehicles with lowered ride height:

- 169 -