H476-USER MANUAL-FULL BOOK-ENGLISH

MAINTENANCE AND SERVICE

Driver Cab

On vehicles with power cab tilt cylinder (optional) Tilting the cab:

Returning the cab to driving position:

DIAGNOSTICS: On manually controlled tilt cylinders: Cab cannot be tilted Check the position of latch on the tilt cylinder. It shall be on the tilt direction. • Tilt cylinder is also serves as the hydraulic oil tank. Open the cover after cleaning the surroundings of the upper cover. Check with your finger, your finger shall touch the oil. • Check for oil leaks through the tilt cylinder, hoses, lift hydraulic line. • Please visit a Ford Trucks authorized dealership if the fault persists. On power cab tilt cylinders: Cab cannot be tilted • Check the position of latch on the tilt cylinder. It shall be on the tilt direction. • Press the yellow button on the tilt cylinder. • Check the fuse of the tilt cylinder. • Check for oil leaks through the tilt cylinder, hoses, lift hydraulic line. • Please visit a Ford Trucks authorized dealership if the fault persists.

5

1) Lower the latch on the cab tilt cylinder up.

1) Lift the latch on the cab tilt cylinder down.

2) Hold the yellow button pressed if the warning is illuminated on the display when you get in the vehicle, this means that cab is not locked correctly. Check it.

2) Hold the yellow button pressed To operate the power cab lifting system, ignition switch shall be at position 2, park brake shall be applied and gear shall be shifted to neutral.

- 175 -