H476-USER MANUAL-FULL BOOK-ENGLISH

CONTROLS AND INDICATORS

Trip Computer

Air pressure indicator

Oil pressure indicator

Air pressure indicator always shows the air pressure of the circuit with the lowest air pressure. Press the button on the indicator if you would like to view the air pressure of the other circuit. Indicator will display the pressure of the circuit with the lowest air pressure automatically after a specified time. Normal operating pressure of the system is 10.5 bars. If any warning is displayed on the screen, the key on the instrument shall lose the function for tank selection as it will be used for conforming these warnings. If you would like to view the 2nd tank, you can do this by moving to another page from the information page. Air pressure audible warning If the air pressure goes below 6.5 bars, low pressure audible warning will be activated. Buzzer is turned off when system pressure reaches the normal operating pressure at both pressure circuits. Do not drive your vehicle before the audible warning is deactivated! If you hear the audible warning while driving stop your vehicle immediately. Block the wheels. Place road safety signs and call a Ford Trucks authorized dealer.

3

Indicates engine oil pressure in "bars". Oil pressure varies depending on the oil temperature and engine speed. Operating pressure: 3 bar @ 90 °C, 2500rpm Idle pressure: 1.5 bars @ 90 °C, 550rpm The warning lamp will be illuminated when the oil pressure is low. Perform the following when the red warning lamp is illuminated: • Park the vehicle in a secure place, stop the engine. Contact a Ford Trucks authorized dealership.

There are 2 independent air system circuits that supply for the front and rear brake systems. You can read the pressures of these systems from a single air pressure indicator. Indicator shows the pressure value of the line with low pressure automatically. Indicator shows the pressure value of the line with low pressure automatically. If the indicator 1 indicates the circuit air pressure, light is illuminated.

If the indicator 2 indicates the circuit air pressure, light is illuminated.

- 27 -