H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Opening and closing of the vehicle

Windows

Window moves to opening or closing direction while the opening/closing butons are pressed. Operation is stopped automatically when the window reaches uppermost or lowermost position. Buttons are active while the ignition is on and for an additional 30 seconds after the ignition is turned off. Quick Window Raising Window is closed automatically when the window closing button is pressed once for a short time. If jamming is detected while raising the windows, power windows are opened again to a specified level. CAUTION If the window is jammed thrice in a row while quick closing, window quick raising feature is deactivated. Window learning procedure shall be started when the doors are closed and lock is open. First, bring the window half way or at least one quarter closed position. Then lower the window to the bottom level and press the button until asher signal is received.

When the asher signal is received, bring the window to the top level with a single press and hold the button until off/on feedback is received from the locks. Window learning operation shall be performed separately for driver window and passenger window. These operations shall not be performed together. Quick Window Lowering When the on/off switch is pressed down for a short time and released, quick lowering feature is activated, and windows are lowered completely automatically. CAUTION System switches to self protection mode automatically when the window operating switch is pressed frequently.

4

1- Driver side window regulator button 2- Passenger side window regulator button

- 52 -