H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Cab Ventilation

Manual Roof Flap

Power Roof Flap

Power roof moves to opening or closing direction while the opening/closing buttons are pressed. Operation is stopped automatically when the power roof reaches uppermost or lowermost position. Buttons are active while the ignition is on. Power roof is closed automatically when the control switch is pressed once for a short period while it is open. Power roof is opened automatically when the control switch is pressed once for a

4

short period while it is closed. Air vent with diaphragms

Power roof is controlled by a control switch located in the centre console.

Switching on: Push the cover up by tightly holding the front and rear rods. Opening the cover from rear or front is applied in two different steps. Open front side or rear side or both sides until required level is reached to obtain the required ventilation. To close: Pull the cover down by holding the rod tightly.

Your cab has a ventilation feature by the vent with 2 diaphragms on the back of the lower bed.

- 54 -