H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Lighting

Headlamp Switch

Headlamp levelling adjustment

WARNING Headlamp levelling shall be adjusted before getting on the road to prevent dazzling the eyes of the drivers of the vehicles in the upcoming traf c in different road conditions. CAUTION The current capacity of the switch may only cover for the available system. Any additions may cause faults on the switch. If an additional illumination system is installed, additional lamps shall have wiring with relay control. Switch shall only control the relay. Audible warning signal is heard when the door is opened when the ignition is off and headlamps are on.

4

Press the knob in the middle for headlamp levelling adjustment. Knob shall come out as shown in the gure. When you rotate the knob to the left (counter-clockwise) headlamp level shall be lowered, and when you rotate the knob to the right (clockwise) headlamp level shall be raised. Press the button on the headlamp switch to make it come out. Rotate the button to set it to the required headlamp levelling adjustment. Press the button on the headlamp switch to bring it to the closed position. Headlamp levelling shall be performed as per the load of the vehicle.

Headlamp switch is placed on the console to the left of the steering. – Headlamps off – Park lamps and indicator illumination – Park lamps, indicator lamps and low beam head lamps Low beam bulbs – Automatic – increasing the interior lighting brightness – decreasing the interior lighting brightness CAUTION Operating park lamps for a long time while the ignition off causes the battery to discharge.

- 71 -