H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Lighting

Autolamps (If Equipped)

Note: When the lighting control is in the autolamps position, while passing through viaducts or under bridges, under varying light conditions or during inclement weather conditions headlamps may automatically turn on and off. Note: It may be necessary to switch your headlamps on manually in severe weather conditions. Note: It may be necessary to switch your headlamps on manually while entering some tunnels. Note: If you have autolamps on, you can only switch the front fog lamps on once autolamps has switched the headlamps on.

Direction Indicator Lever

WARNING The autolamps switch position may not activate the headlamps in all low visibility conditions, such as daytime fog. Always ensure that your headlamps are switched to auto or on, as appropriate, during all low visibility conditions. Failure to do so may result in a collision

4

It is placed on the left side of the steering. Switch positions are as follows. – Right Direction Indicator – Left Direction Indicator – High Beam (Flasher) Flasher is operated by pulling the handle brie y and releasing it. – High Beam (Continuous) High beam is operated continuously when the handle is released after being pulled at full stroke. If the direction indicator lever is moved halfway to the and positions, direction indicators are illuminated for 6 seconds and then automatically turned off. This would increase attention on the road, especially when you are changing lanes.

When the lighting control is in the autolamps position, the headlamps automatically turn on in low light situations.

- 72 -