H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

WindowWashing and Heating Systems

Note: Once you choose a different speed or park position on the wiper switch, autowipers feature will be deactivated, and wipers will operate according to the selected switch position. Note: Fully defrost the windscreen before switching on the windscreen wipers. Note: Make sure the windscreen wipers are switched off before washing your truck. Note: Clean the windscreen and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, install new wiper blades. Note: During driving, if the autowipers operate the wipers slower or faster than you expect, choose most suitable wiper speed manually on the wiper switch. Note: Keep the outside of the windscreen clean. Sensor performance will be affected if the blackened areas on the lower center part of the windscreen is dirty. The rain sensor is very sensitive and the wipers may operate if dirt, mist or ies hit the windscreen.

Note: Wet or winter driving conditions with ice, snow or salty road mist can cause inconsistent and unexpected wiping or smearing. In these conditions, you can do the following to help keep your windshield clear: • Switch to normal or high-speed wipe • Switch the autowipers off.

Windshield Heating (Available on vehicles with Cold Climate pack only)

4

To activate: press the button on the control panel while the engine is on. To deactivate: The resistor will automatically be disabled after 5 minutes. Press the button again to deactivate the heater when it is activated.

- 77 -

Made with FlippingBook - Online Brochure Maker