H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Circuit Breakers

Using the external switch

Vehicles without ADR

Use the circuit breakers to disconnect the electrical current in your vehicle. Vehicles with ADR

4

To cut the circuit off Lift the safety cover. Raise the switch. To re-activate the electricity supply of the vehicle: Put the switch down Close safety cover. CAUTION Using this switch frequently may damage electronic devices on the vehicle. When any one of the cab interior and exterior breaker switches is activated, some electrical loads are deactivated within 1 second. After 10 seconds, all electrical connection shall be disconnected.

An ADR switch shall be available on vehicles that transport ammable, explosive, combustible material. ADR switch cuts all electricity of the vehicle off. There are 2 ADR switches on your vehicle; one is inside the cab, and one is outside. Both switches have the same function. To cut the circuit off, it is adequate to turn off one. Using the internal switch To cut the circuit off: Raise the safety cover and raise the switch. To re-activate the electricity supply of the vehicle: Put the switch down. Close safety cover.

- 78 -