H476-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Driving

Cruise Control

Driving speed is set by the multifunction lever on the right of the steering. Engine electronic control unit adjusts the throttle setting required for driving the vehicle at the set speed. Vehicle is driven in the set speed without the need for the driver's applying the accelerator pedal. When the cruise control is activated, it is automatically deactivated in the following conditions: • Applying the brake • Applying the clutch (in vehicles with manual transmission) • In case activating the engine brake, cruise control is deactivated automatically When cruise control is activated, it is shown as figure depicted below on the cluster information menu.

CAUTION Vehicle cuts throttle if the set speed is exceeded, and engine brake is activated if the engine speed is over 1000 rpm. • Cruise control cannot be activated for vehicle speeds under 30km/h. • Cruise control cannot be activated for vehicle speeds over the speed limit. • Cruise control is deactivated automatically if it is active when speed limit is exceeded. • For convenience of use, cruise control remains active until gear is changed when the clutch is applied for 5 seconds in vehicles with manual transmission.

4

Pull the lever towards you to activate,

(position the indicator. )

shall be displayed on

- Increasing the speed - Decreasing the speed - Deactivation - Engine brake and retarder - Resuming cruise control

- 93 -

Made with FlippingBook - Online Brochure Maker