Lincoln-MKT-Owner-Manual

Seats

Saving a PreSet Position 1. Switch the ignition on. 2. Adjust the memory features to your desired position. 3. Press and hold the desired preset button until you hear a single tone. You can save up to three preset memory positions. You can save a memory preset at any time. Recalling a PreSet Position Press and release the preset button associated with your desired driving position. The memory features move to the position stored for that preset. You can recall a programmed memory position: • Only in park (P) or neutral (N) if the ignition is on. • In any gearshift position if the ignition is not on.

You can also recall a programmed memory position by: • Pressing your remote control transmitter unlock button (if the remote control is programmed to a memory position). • Unlocking your vehicle with an intelligent access key (if it is programmed to a memory position). Note: Using a linked keyfob to recall your memory position when the ignition is off moves the seat to the Easy Entry position. Note: Adjusting any active memory feature or pressing a memory switch during a memory recall cancels the operation. Linking a PreSet Position to your Remote Control or Intelligent Access Key Fob Your vehicle can save the preset memory positions for up to two remote controls. 1. With the ignition on, move the memory features to the desired positions.

2. Press and hold the desired preset button for about five seconds. A tone sounds after about two seconds. Continue holding until you hear a second tone. 3. Within three seconds, press the lock button on the remote control you are linking. To unlink a remote control, follow the same procedure – except in step 3, press the unlock button on the remote control. Note: If more than one linked remote control or intelligent access key is in range, the memory function moves to the settings of the first key to initiate a memory recall. Easy Entry and Exit Feature This feature adjusts the position of the seat and steering column to allow easier exit and entry to the vehicle. The driver seat automatically moves 2 in (5 cm) rearward when the transmission is in park (P) and you remove the key from the ignition or you switch the ignition off.

141

MKT (TP4) , enUSA, Edition date: 201703, First Printing