Lincoln-MKT-Owner-Manual

Traction Control

Switching the System Off When you switch the system off or on, a message appears in the information display showing system status. You can switch the system off by either using the information display controls or the switch. Using the Information Display Controls You can switch this feature off or on in the information display. See General Information (page 109). Using a Switch (If Equipped) Use the traction control switch on the instrument panel to switch the system off or on. System Indicator Lights and Messages

PRINCIPLE OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.

USING TRACTION CONTROL

WARNING The stability and traction control light illuminates steadily if the system detects a failure. Make sure you did not manually disable the traction control system using the information display controls or the switch. If the stability control and traction control light is still illuminating steadily, have the system serviced by an authorized dealer immediately. Operating your vehicle with the traction control disabled could lead to an increased risk of loss of vehicle control, vehicle rollover, personal injury and death. The system automatically turns on each time you switch the ignition on. If your vehicle is stuck in mud or snow, switching traction control off may be beneficial as this allows the wheels to spin. Note: When you switch traction control off, stability control remains fully active.

The stability and traction control light:

E138639

193

MKT (TP4) , enUSA, Edition date: 201703, First Printing