Lincoln-MKT-Owner-Manual

Driving Aids

Note: When a vehicle passes quickly through the blind spot zone, typically fewer than two seconds, the system does not trigger. Using the System The Blind Spot Information System turns on when you start the engine and you drive your vehicle forward above 3 mph (5 km/h). For automatic transmissions, the Blind Spot Information System remains on while the transmission is in drive (D). If shifted into reverse (R) or park (P) the Blind Spot Information System turns off. Once shifted back into drive (D), the Blind Spot Information System turns back on when you drive your vehicle above 3 mph (5 km/h). For manual transmissions, the Blind Spot Information System is on for all gears except the reverse (R). Note: The Blind Spot Information System does not function in reverse (R) or park (P).

System Lights and Messages

System Sensor Blockage

E205199

The system uses radar sensors that are located behind the bumper fascia on each side of your vehicle. Any dirt, mud and snow in front of the sensors and/or driving in heavy rain can cause system degradation. Also, other types of obstructions in front of the sensor can cause system degradation. This is referred to as a ‘blocked’ condition. Note: Do not apply bumper stickers and/or repair compound to these areas, this can cause degraded system performance.

E142442 The Blind Spot Information System

illuminates an amber alert indicator in the outside mirror on the side of your vehicle the approaching vehicle is coming from. The alert indicator dims when the system detects nighttime darkness.

224

MKT (TP4) , enUSA, Edition date: 201703, First Printing