Lincoln-MKT-Owner-Manual

Maintenance

WARNINGS To reduce the risk of personal injury, make sure the engine is cool before unscrewing the coolant pressure relief cap. The cooling system is under pressure. Steam and hot liquid can come out forcefully when you loosen the cap slightly. Do not add coolant further than the MAX mark. When the engine is cold, check the concentration and level of the coolant at the intervals listed in the scheduled maintenance information. See Scheduled Maintenance (page 483). Note: Make sure that the coolant level is between the MIN and MAX marks on the coolant reservoir. Note: Coolant expands when it is hot. The level may extend beyond the MAX mark.

Message

Action and description

From the main menu scroll to:

If the instrument cluster displays one of the following messages, repeat the process. Not Reset Reset Cancelled

Message

Action and description

Settings

Press the right arrow button, then from this menu scroll to the following message. Press the right arrow button, then from this menu scroll to the following message. Press the right arrow button, then from this menu scroll to the following message. Press and hold the OK button until the instrument cluster displays the following message. Reset Successful When the oil change indicator resets the instrument cluster

Vehicle

ENGINE COOLANT CHECK

Oil Life

WARNINGS Do not remove the coolant reservoir cap when the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury. Do not put coolant in the windshield washer fluid reservoir. If sprayed on the windshield, coolant could make it difficult to see through the windshield.

Hold OK to Reset

displays 100%. Remaining Life {00}%

293

MKT (TP4) , enUSA, Edition date: 201703, First Printing