Lincoln-MKT-Owner-Manual

Wheels and Tires

Stowing the jack

Stowing the flat tire

12. Lower the wheel by turning the jack handle counterclockwise.

1

4

3

E211100

1. Fully collapse the jack, fold the lug wrench socket into the handle and place the jack and wrench into the felt bag as shown. Place the extension bolt or L-shaped bolt into the external pocket of the felt bag. Position the jack as shown to make sure that the locating holes in

E194296 If you are stowing the flat tire, remove the L-shaped bolt from the external pocket of the felt bag. With the third row seat in the raised position, stand the flat tire in the rear of the vehicle with the tire’s valve stem facing the rear of the vehicle. Fasten the flat tire to the vehicle by inserting the L-shaped bolt through one of the lug bolt holes in the wheel. Turn it clockwise into the threaded hole in the vehicle until the tire is secured. If you are stowing the temporary spare tire, place the tire over the jack and secure it with the large wing nut.

2

5

E75442

the jack base can be placed on the locating tabs of the jack mounting bracket in the spare tire tub.

13. Remove the jack and fully tighten the lug nuts in the order shown. See Technical Specifications (page 348). 14. Install the wheel cover.

2. Securely close the wrench compartment and the jack bag using the Velcro™ straps. 3. Place the jack kit on the angled bracket in the spare tire tub, using the locating tabs to position the jack correctly.

346

MKT (TP4) , enUSA, Edition date: 201703, First Printing