Lincoln-MKZ-Owner-Manual

Maintenance

Note: Do not remove the dipstick when the engine is running. Note: If the oil level is between the maximum and minimum marks, the oil level is acceptable. Do not add oil. Note: The oil consumption of new engines reaches its normal level after approximately WARNING Do not remove the filler cap when the engine is running. Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by the vehicle Warranty. 3,000 mi (5,000 km). Adding Engine Oil

3. Add engine oil that meets Ford specifications. See Capacities and Specifications (page 380). You may have to use a funnel to pour the engine oil into the opening. 4. Recheck the oil level. 5. If the oil level is correct, replace the dipstick and make sure it is fully seated. 6. Replace the engine oil filler cap. Turn it clockwise until you feel a strong resistance. Note: Do not add oil further than the maximum mark. Oil levels above the maximum mark may cause engine damage. Note: Make sure you install the oil filler cap correctly. Note: Soak up any spillage with an absorbent cloth immediately. OIL CHANGE INDICATOR RESET Use the information display controls on the steering wheel to reset the oil change indicator.

E142732 Only use oils certified for gasoline engines by the American Petroleum Institute (API). An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Committee (ILSAC). To top up the engine oil level do the following: 1. Clean the area surrounding the engine oil filler cap before you remove it. 2. Remove the engine oil filler cap. See Under Hood Overview (page 304). Turn it counterclockwise and remove it.

309

MKZ (CC9) Canada/United States of America, enUSA, Edition date: 201706, First Printing