S05_G_ASE_LHD_EV_English_15AUGUST

Vehicle Driving

The system may not be able to identify a stationary vehicle, a slow - moving vehicle, or an odd - shaped vehicle with obscure features in front, especially when the vehicle's speed is too high or there is a certain angle between it and the vehicle in front, which may cause a risk of collision.

4. Lane line is not standard

If the lane markings are unclear (dilapidated, missing, reflective on the road surface, with changing brightness, in the shade of trees or isolation belts, etc.) or messy (such as multiple groups of markings at intersections, divergence and merge locations, ramp entrances, etc.), the system cannot predict the driving trajectory and may result in unexpected wrong turns or even direct exit.

5. Uneven road

When the wheel presses over the pits, stones, and other protrusions on the road surface, the vehicle's heading may change momentarily due to road interference, and the vehicle may deviate from the lane. The system may temporarily exit due to a bumpy vehicle that doesn’t recognize the lane line. 6. The system may mistakenly identify lane - like features such as curbs (especially in tunnels), wheel marks, road gaps, snow, etc. as lanes, causing the vehicle to deviate from the center of the lane or change direction briefly. 7. When a vehicle enters a curve, passes through a continuous curve, or has a curve with a small turning radius, slippery roads, or speeding, the system may not be able to assist the driver to control the vehicle in the lane or even exit directly.

8. Congested or confluent roads

The system may not be able to respond to vehicles approaching at close range, especially when the congested road is in the follow - up control mode, and there is a risk of collision.

132