S05_G_ASE_LHD_EV_English_15AUGUST

Vehicle Driving

Automatic Parking Assist

Remote Straight In&Out (RSIO)

Remote entry and exit assistance: You can remotely control the vehicle forward or reverse using the vehicle key. It can meet your needs for comfortably getting on and off in narrow vertical parking spaces.

Key Remote Straight In & Out

Before using this function, please click [Vehicle Center] - [Intelligent Driving] - [Parking Assistance] - [Remote Straight In & Out (RSIO)] on the central control display screen. When turning on the switch, please carefully read the content in the [Instructions for Use] to ensure that you are clear about the application scenarios of this function and your responsibilities.

This function does not have the ability to actively avoid collisions. You are fully responsible for the safety of the function. Please strictly follow the steps below to use the key Remote Straight In & Out (RSIO) function:

1. Enable the function

Activation conditions:

① The vehicle is powered off or parked.

② There are no vehicles blocking the front or rear of the vehicle.

How to enable:

Press and hold the trunk button on the remote control key outside the vehicle until the vehicle's emergency flashers turn on and the system is activated.

2. In & Out control

After the system is activated, the customer can control the vehicle to move forward or backward in a straight line by pressing and holding the unlock or lock button on the remote key, depending on the parking situation. This operation must be completed within 60 seconds after the hazard lamps are turned on, otherwise the system will exit. The system can support a maximum forward or backward movement of 15 meters based on the vehicle's initial position.

141