S05_G_ASE_LHD_EV_English_15AUGUST

Vehicle Driving

The loop recording function of driving recorder is only valid once. After the vehicle is restarted, the customer needs to choose to turn it on or off again.

Vehicle Status Information

The top status bar of the driving recorder interface displays the vehicle status information during driving. When the external image recording is turned on, the vehicle status information can be recorded. From left to right in the status bar are: Recording status, date and time, driving assistance system status, vehicle speed, gear signal, accelerator pedal status, brake pedal status, left turn signal lamp status, right turn signal lamp status, and driver's seat belt status.

Operation tips

The following are the ways to open driving recorder:

1. Click the "Got it, turn on the function" button in the privacy pop - up window;

2. On the premise that you have clicked the "Got it, turn on the function" button in the privacy pop - up window:

1)

Click the [Driving Recorder] icon in the App Center.

2) In the top status bar, click icon , turn on the [Ordinary Recording] switch.

3) Use the voice command "Open Driving recorder " to turn on driving recorder.

Emergency recording

When loop recording is turned on, when emergency braking or collision signals are detected, the video 15 seconds before and after the trigger moment will be saved in the emergency recording file as a separate video that will not be overwritten by the loop, and can be opened in the left column of driving recorder interface.

Emergency recording will be triggered under the following conditions:

• Click [Emergency Recording] in the driving recorder interface.

• Emergency Brake pedal signal detected.

• An emergency collision signal is detected.

167