S05_G_ASE_LHD_EV_English_15AUGUST

Charge and Discharge

2. After charging is completed, cover the dust cover of the charging socket to prevent water drops or foreign objects from entering the exposed charging socket. 3. If you need to start the vehicle during charging, you need to stop fast charging first, wait for the fast charging gun to be unlocked and then pull out the gun before starting the vehicle. 4. It is recommended to avoid outdoor charging on rainy and snowy days to prevent the ice - water mixture from clogging the drainage area of the charging port and causing ice accumulation in the charging port, affecting the plugging and unplugging of the charging gun.

Charging Current Setting

1. The default charging current limit is "maximum", which is the maximum current capacity that the charging gun cable and charging pile recognized by the vehicle can output and transmit. If you are worried that the load capacity of the home circuit is insufficient, you can click [Vehicle Center] - [Energy] - [More] - [Charging Current Limit] on the central control display to bring down the set value of charging current.

2. The setting of charging current limit value is only applicable to slow charging.

CAUTION

1. If you use a household socket to connect the charging gun, to avoid overheating of the circuit, it is recommended that you use a power socket of 16A or above. 2. Do not set the charging current higher than the maximum available current of the connected charging cable. 3. The actual charging current may affect the charging efficiency due to grid fluctuations or if the grid load capacity fails to reach the set limit.

Discharge Outside the Vehicle

Power on the vehicle and switch the gear to P, connect the discharge gun, and the vehicle will provide power output to meet your need of using 220V AC power.

173