S05_G_ASE_LHD_EV_English_15AUGUST

Maintenance and Self - service

WARNING

The jump - start cable must be a special automotive jump - start cable with a cable specification of ≥25 square millimeters. If the battery frequently lacks power and the cause is not found, contact an authorized dealer for maintenance.

Jacking and Lifting

Follow the steps below to raise the vehicle.

1. Park the vehicle in the center of the lifter;

2. First, remove the body lower protective panel cover, place the lift arm pad under the designated body lifting area. The lifting area is the area under the body protective cover and the lower stop area of the body sheet metal door sill corresponding to the marking. The lifting gap and marking of the body protective cover are shown in the figure. Do not place the lift arm pad under the battery.

3. Adjust the height and position of the lift arm pad to ensure proper placement;

4. Raise the lift to the desired height, making sure the lift arm pad remains in place;

5. Follow the lift manufacturer's instructions and engage all lift safety locks.

WARNING

Do not lift the vehicle while the charging cable is connected.

DANGER

Never operate a vehicle that is not properly supported, as this may result in a safety accident.

211