S05_G_ASE_LHD_EV_English_15AUGUST

Travel Preparation

initialize them as follows:

1. Make sure doors are closed;

2. Press the window switch backward to raise the window glass to the top, and keep the switch pressed for 2 to 3 seconds; 3. Press the window switch forward to lower the window glass to the bottom, and keep the switch pressed for 2 to 3 seconds;

4. Press and hold the window lift switch to try to have the window glass rise automatically.

If the window does not rise automatically, please repeat steps 2 and 3 above to set it up. If multiple attempts fail, please contact a Changan Automobile authorized dealer.

DANGER

There is still a risk of pinching injuries despite anti - pinch protection; make sure the closing area of the window is unobstructed. The anti - pinch function doesn’t work for the following conditions:

• Touch soft, light and delicate objects, such as a little finger.

• Only 4mm gap is left.

• When the window is closed manually again immediately after the automatic reverse movement. This means that the anti - pinch function can’t play a protective role in this kind of situation. When closing, make sure that no part of the body is in the closed area.

Electric sunshade ※

Operation method on the central control display screen:

• When the default desktop is the vehicle control desktop, click , then click [Sunshade] above the 3D car model, click [Full Open]/[Full Close]/[Stop] to automatically open/close/stop the sunshade: – Click [Full Open] and the sunshade will automatically open to the fully open position. – Click [Full Close] and the sunshade will automatically close to the fully closed position. – When the sunshade is automatically opening or closing, click [Stop] and the sunshade will stop immediately. • Click the model sunshade slider to any position, and the sunshade will automatically open or close to the corresponding position immediately. • Click [Sunshade] in the drop - down menu to automatically open/close the electric sunshade.

Anti - pinch Function

Under working conditions of - 20 ℃ ~ 80 ℃ , if the electric sunshade encounters a certain resistance when closing, it will automatically stop and move in the opposite direction to fully open. It will not respond to any operation during this period. After fully opening, the function

21