S05_G_ASE_LHD_REEV_English_15AUGUST

Travel Preparation

CAUTION

“One-key power off” can only be operated in P gear.

After "One-touch Power Off", the vehicle can be unlocked and powered on again through the smart remote control key.

Immobilizer

Immobilizer system overview

Vehicles with keyless systems use an advanced engine immobilizer system, which performs immobilizer authentication through smart eey, body control module, and power control module.

Only vehicles that have undergone full immobilizer system certification can be started.

Alert State

The alert state can’t be activated if any of doors and back door is not closed.

Enter the alert state as follows:

1. Park the vehicle and stop the vehicle power system, press the key to lock the vehicle, and switch the vehicle power to OFF state;

2. Take out the key from the vehicle;

3. Make sure the vehicle's hood, back door and all doors are closed;

4. Press the lock button on the remote control to lock the vehicle and turn signal lamp will flash twice. After completing the above steps, engine immobilizer system is successfully started and enters the alert state.

Release of Alert State

For vehicles with a keyless system, press the key unlock button to open doors and end the vehicle body alert state. The power is switched to the ON state and engine Immobilizer authentication is successful. After unlocking, if any door or the back door automatically locks in 30s and the key is detected not in the car, the car will re-enter the alert state.

Alert State

In the alert state, if any of the following events occurs, the system will enter the alert state:

Any door is opened without unlocking using the key button;

• The back door is opened illegally

• The hood is open

• Vehicle power status changes

Under alert state, the horn honks, and the turn signal keeps blinking.

15