S05_G_ASE_LHD_REEV_English_15AUGUST

Travel Preparation

This means that the anti-pinch function can’t play a protective role in this kind of situation. When closing, make sure that no part of the body is in the closed area.

Electric sunshade ※

Operation method on the central control display screen:

• When the default desktop is the vehicle control desktop, click , then click [Sunshade] above the 3D car model, click [Full Open]/[Full Close]/[Stop] to automatically open/close/stop the sunshade: – Click [Full Open] and the sunshade will automatically open to the fully open position. – Click [Full Close] and the sunshade will automatically close to the fully closed position. – When the sunshade is automatically opening or closing, click [Stop] and the sunshade will stop immediately. • Click the model sunshade slider to any position, and the sunshade will automatically open or close to the corresponding position immediately. • Click [Sunshade] in the drop-down menu to automatically open/close the electric sunshade.

Anti-pinch Function

Under working conditions of -20 ℃ ~ 80 ℃ , if the electric sunshade encounters a certain resistance when closing, it will automatically stop and move in the opposite direction to fully open. It will not respond to any operation during this period. After fully opening, the function will return to normal.

Anti-pinch function is only activated when the electric sunshade is operating automatically.

DANGER

Despite the anti-pinch protection there is still a risk of pinching; make sure the closing area of the electric sun blind is unobstructed. The anti-pinch function doesn’t work for the following conditions:

• Touching soft, light, and delicate objects, such as a little finger;

• Only 4mm gap is left.

This means that the anti-pinch function can’t play a protective role in this kind of situation. When closing, make sure that no part of the body is in the closed area.

Initialization of electric sunshade

If the sunshade cannot be operated at any position, you can try to initialize it: click the sunshade [Full Close] button on the central control display until the sunshade is fully closed. If you click the [Full Close] button and it still cannot be closed to the fully closed position, press and hold the [Full Close] button for more than 6 seconds to enter the initialization state.

22