S05_G_ASE_LHD_REEV_English_15AUGUST

Smart Ride

Safe Ride

Seat

Seat Overview

The seat front and rear position and backrest angle status set for this model are:

• Seat front and rear design position: The seat's rearmost position slides forward 30 mm.

• Backrest design angle: That is, the angle between the dummy’s torso line and the vertical direction after the dummy is placed on the seat. The backrest design angles of this model are 25° for the front row and 28° for the rear row.

Correct Sitting Posture

Uttermost protection can be got in case of vehicle collision only when the seat, headrest, seat belt and airbag are correctly used. When the vehicle is running, we suggest you to: • Adjust seat position correctly to ensure that the seat and backrest are locked at proper positions. Don’t tilt the backrest excessively. • The driver shall keep an enough safe distance from the steering wheel and incline the steering wheel downward as far as possible to keep the airbag directly facing the driver's chest. • Adjust to a correct sitting posture to sit up right as much as possible with back leaning against the backrest. • Wear seat belt correctly Esee the “Smart Ride – Safe Ride – Seat Belt ” section for details .

DANGER

Don’t drive the vehicle before passengers sit properly. Passengers are not allowed to sit on folded seatbacks, in trunk, or on cargo. Passengers are not allowed to stand or move among seats while the vehicle is running for fear of injury or death caused by emergency braking or vehicle collision.

Don’t put anything unevenly weighed or sharp Elike needles or nails on the seat.

For seat equipped with a side airbag, don’t refit or replace it or its cover; otherwise the normal activation of side airbag may be affected or the airbag may deploy accidentally, resulting in

44