C318-G User manual – MEA (English UI) (update changes appli

Vehicle driving

Warning! For towing requirements, ensure you activate [Vehicle Center] - [Safety and Maintenance] - [Trailer Mode] on the central display to disengage electronic parking (refer to "Emergency Rescue - Post Accident Towing - Trailer Mode" for details). Failure to activate trailer mode prior to towing may result in vehicle damage. Automatic parking (AUTO HOLD) AUTO HOLD assists drivers with automated parking. Upon function activation, the central display indicator illuminates, preventing vehicle roll even if the brake pedal is released. AUTO HOLD aids drivers in these scenarios:  Starting, particularly on steep inclines;  Maneuvering on steep slopes;  When vehicles need to wait while driving on the road. Conditions for AUTO HOLD activation:  The vehicle is fully stationary;  The central control display screen shows 'READY';  The driver's door is closed;  The driver's seat belt is fastened or the driver's seat occupancy sensor is activated;  The electronic parking fault indicator is off;  The ESC system is activated and free of faults;  Press the brake pedal firmly. When the vehicle tends to roll downhill after AUTO HOLD is activated, AUTO HOLD automatically increases brake system pressure to prevent vehicle movement, accompanied by ESC motor If the vehicle exhibits a slip tendency again, AUTO HOLD will automatically switch to electronic parking, which is normal. Upon vehicle start, if AUTO HOLD is active, press the accelerator pedal or release the brake pedal and then press it again to disengage parking. Caution When both AUTO HOLD and Hill Hold Control (HHC) conditions are met, AUTO HOLD activates first, and the central display screen indicates its activation. After approximately 3 minutes of continuous operation, AUTO HOLD automatically switches to electronic parking. When AUTO HOLD is enabled, ESC motor noise is present, which is normal.

123