C318-G User manual – MEA (English UI) (update changes appli

Vehicle driving

Warning! Given complex road conditions (e.g., consecutive or sharp bends) and system detection limits, ACC's bend deceleration may not ensure safety. Adjust cruise speed according to these conditions and avoid speeding. Adjust the car-following headway After activating ACC, press to lengthen the car-following headway. Press to shorten the car-following headway. The car-following headway has 4 levels, increasing from level 1 to level 4. Each restart defaults the car-following headway to the previous setting. During the car-following control process, the time gap between our vehicle and the vehicle ahead is displayed in three colors: green (basically consistent with the set value), yellow (closer than the set value), and red (too close compared to the set value). If red is displayed, please promptly adjust the cruise speed or car-following headway and take control of the vehicle if necessary.

After deactivating ACC, the cruise control system will exit to standby mode by performing the following operations or meeting (not limited to) the following conditions:  Press the brake pedal while the vehicle is in motion;  Apply the parking brake.  The vehicle slides down the hill after the lead vehicle stops;  Press the ACC exit button;  Open the driver's door;  Turn off the ESC function;  Shift out of D gear;  The driver unfastens the seat belt

133