C318-G User manual – MEA (English UI) (update changes appli

Vehicle driving

 HDC/ESC/ABS/automatic emergency braking function activated;  Being in the driver's active acceleration mode for more than 15 minutes or driving at a speed exceeding 155 km/h;  Associated system fault;  All-terrain mode activated;  When a trailer is attached to the rear of the vehicle. After the ACC controls the vehicle to a stop, pressing the brake pedal will not deactivate ACC. Caution In any case, if you determine that there is a safety risk with the vehicle, please decisively cancel or turn off the ACC and immediately take over and control the vehicle. When restoring ACC from active to standby mode: Press the button, and ACC will reactivate and return to the previously set speed. Press the button, ACC will reactivate and automatically set the current vehicle speed as the cruise speed. When pressing the button to restore ACC, the restored set cruise speed may significantly differ from the current driving speed. The driver must ensure that the set cruise speed complies with the speed limit rules of the current road section and pay attention to vehicle acceleration and deceleration changes to adjust the cruise speed promptly. Driver's active acceleration mode After ACC activation, when actively pressing the accelerator pedal to accelerate, the system enters the driver's active acceleration mode (overtaking mode). After releasing the accelerator pedal, ACC regains control of the vehicle. Caution

ACC Stop Go Control

134