C318-G User manual – MEA (English UI) (update changes appli

Vehicle driving

7. In the "360 panoramic" application, "Slope view assist" is enabled; when the vehicle speed is less than 15 km/h and the vehicle ascends a slope greater than 9 degrees, the around view monitor is automatically activated. Exiting the around view monitor: 1. When "Full speed panoramic" is disabled in the "360 panoramic" settings and the vehicle speed exceeds 30 km/h while moving forward, the around view monitor ends. 2. In a non-reverse gear, click the "360° view" - "Close" button to exit the around view monitor. 3. When shifting into park (P), the around view monitor will exit. 4. The around view monitor can be deactivated by pressing the 360 hard button on the steering wheel. Warning! It is strictly forbidden to use tools or sharp objects like sandpaper or polishing machines to polish the camera lens, to avoid scratching the lens surface. View switching Panoramic + front/rear/front left/front right view switching In the panoramic view, clicking the front (A), rear (C), left (D), and right (B) areas allows switching to the corresponding panoramic + front, panoramic + rear, panoramic + left, and panoramic + right single views.

When switching from reverse (R) gear to a non-reverse gear, the view will automatically switch to panoramic + front view. Vehicle wheel hub view switching In the panoramic + single view, clicking the (E) and (F) buttons on the car model switches the view to panoramic + front left front right view, or panoramic + left-rear right-rear view.

151