C318-G User manual – MEA (English UI) (update changes appli

Vehicle driving

Caution

At night or in poorly lit areas; Camera exposure to strong light;





 Area is lit by fluorescent or LED lights (central display might flicker);  In wintertime, entering a garage with heating where temperature shifts rapidly. If components housing the cameras are damaged, promptly visit an authorized service center to verify camera positioning and recalibration. Entering and exiting panoramic view Around view monitor employs four cameras on the body's front, rear, left, and right sides to capture images, presenting a 360-degree view on the central control screen, thus offering driving safety assist to drivers.

To activate the around view monitor system: (conditions: vehicle in ON gear, full-speed panoramic switch is off, and speed < 27km/h) 1. Press the 360 hard button on the steering wheel to enable the around view monitor feature; 2. Click on "Application Center" - "360 panoramic" on the central control display to activate the around view monitor function. 3. Activate the around view monitor function by using the voice command "Open around view monitor." 4. When the vehicle is in the reverse (R) gear, the around view monitor is automatically activated. 5. In the "360 panoramic" application, if the "Turn signal trigger panoramic switch" is activated and the vehicle speed is below 15 km/h with the left/right turn signal on, the around view monitor will automatically activate. 6. In the "360 panoramic" application, if "Radar triggered panorama" is enabled, and the vehicle is in non-P and non-R gear with a speed less than 15 km/h, the central display will switch to the around view monitor if the front radar detects an obstacle below the set threshold.

150