C318-G User manual – MEA (English UI) (update changes appli

Vehicle driving

After enabling the lane departure warning (LDW) function:  When the vehicle speed is less than 60 kph, the system is in standby mode and the lane departure warning system status indicator on the instrument display is white;  When the vehicle speed exceeds 60 kph, the system automatically enters the active state and the lane departure warning system status indicator on the instrument display is green. The instrument display screen image warning mode is: the lane line turns orange during deviation warning and turns red during emergency lane keeping. Refer to the "Vehicle Driving - Cruise Control - Adaptive Cruise Control (ACC)" chapter for details. Correct the vehicle direction immediately when a lane departure warning sounds. Warning! Drivers should always take full responsibility for correctly controlling the vehicle and maintaining safety:  The system will not continuously issue warnings or make corrections. When the system issues a deviation warning or performs auxiliary steering, the driver should promptly correct the vehicle's driving trajectory to ensure safety.  Under conditions where the system is restricted, such as rain, snow, fog, dust, or poor visibility, the deviation alarm or auxiliary steering may not trigger or may trigger later. Avoid using the system under restricted conditions.  The system's auxiliary correction may not prevent vehicle lane deviation on wet roads, sharp turns, or at excessive speeds. Warning method Click on "Vehicle Center" - "Intelligent Driving" - "Driving Assistance" - "Lane Departure Assistance Mode" on the central control display screen to choose the lane departure warning mode: 1. Sound; 2. Vibration; 3. Sound + Vibration.

162