C318-G User manual – MEA (English UI) (update changes appli

Vehicle driving

Instructions for use When the vehicle is powered on, activate or deactivate the "emergency lane keeping" function by clicking on "vehicle center" - "intelligent driving" - "safety assist" on the central control display screen.

After activating the ELK function, the system enters standby mode when the vehicle speed exceeds the system's operating speed (ELK_LCS: 40 km/h, ELK_re: 60 km/h). If the sensor identifies lane markings on both sides and detects a collision risk with "oncoming vehicles" when the vehicle deviates from its lane, or a collision risk with road boundary guardrails, the system will temporarily intervene to correct the vehicle's driving trajectory. Warning! Drivers should always take full responsibility for correctly controlling the vehicle and maintaining safety:  The system does not continuously provide steering assistance. When the system performs assisted steering, the driver must immediately correct the vehicle's driving trajectory to ensure driving safety.  In restricted system conditions, such as rain/snow/fog/sandstorm weather with poor visibility, auxiliary steering might not activate or may activate erroneously. Avoid using under these conditions. Fault handling Fault of the front-facing camera, lateral millimeter-wave radar, or related systems will render the corresponding ELK function unavailable. Refer to the troubleshooting methods for LCDA and lane departure warning systems for maintenance. If the fault persists, visit an authorized service center for resolution. DVRsystem

171