C318-G User manual – MEA (English UI) (update changes appli

Charging, discharging and fueling

Caution 1. When using a household outlet to connect the charger, it is recommended to use a 16A or higher power socket to avoid circuit overheating. 2. Do not set the charging current higher than the maximum current allowed by the connected charging cable. 3. The actual charging current may vary due to fluctuations in the power grid or the grid's load capacity not meeting the set limit, impacting charging efficiency. Out-car discharge The operation steps are as follows: 1. Park the vehicle in a well-ventilated area, power on the vehicle, and ensure it is in Park (P) gear. 2. Open the charging port cover and the dust cover of the slow charge socket. 3. Insert the discharge plug into the slow charge socket and connect the electrical device to the discharge outlet on the other end. 4. Use the central control display screen to access [Vehicle Center] - [Energy] and turn on the [External Discharge] switch.

5. Turn on the discharge switch located on the discharge socket, and wait for the discharge indicator to illuminate before proceeding with external discharge. If the power battery level is too low, the system will cease discharging. You can continue to externally discharge by accessing [Vehicle Center] - [Energy] - [Discharge Settings] and turning on the [Low Battery Start Engine] switch via the central control display screen.

180