C318-G User manual – MEA (English UI) (update changes appli

Maintenance and self-service

Usage, cleaning, and maintenance of exterior lamps The roof high beam, campsite lighting, and taillight covers are made of PMMA, a polymer not resistant to organic substances and high temperatures. If organic detergents are mistakenly used or the surface temperature changes abruptly, performance effects such as cracking, delamination, and degradation may occur. Caution Ensure water temperature does not exceed 60℃ when cleaning, and avoid mixing detergent with hotwater. The lamp cover should not come into contact with strong acidic, strong alkaline, corrosive, or highly reactive detergents. Do not use alcohol (liquor) with more than 10% concentration, tire cleaning fluid, bitumen cleaning agents, hydrofluoric acid, and various esters, ketones, or aromatic compounds to contact or clean automotive lamps. When the vehicle is stationary, try to avoid leaving it in high-temperature environments for extended periods, like a paint curing booth. Do not immediately clean the lamp surface with cold water or other liquid detergents when the surface temperature is high after summer exposure to heat. After driving in areas using snow removal agents in winter, promptly wash the bottom of the vehicle, body, and surfaces of the lamps to remove dirt. Headlight brightness National standards dictate the brightness of motor vehicle headlights; they must not be excessively bright or dim, as this could lead to safety incidents. Because our vehicles are designed for right-hand driving, the low beam is designed to be lower on the left and higher on the right to prevent headlights from impairing the visibility and safety of oncoming traffic. If your headlights appear dim, it is recommended to seek consultation and testing at an authorized service center. Mechanical adjustments are strictly prohibited. Wiper blade Check the wiper blades Slide your fingertips along the edge of the wiper blade's rubber strip. If the edge is damaged and the windshield cannot be fully cleaned, replace the wiper blade immediately.

201