C318-G User manual – MEA (English UI) (update changes appli

Maintenance and self-service

Clean the plastic and trim components

Use a damp soft cloth to wipe away dirt and dust. If dirt persists, use a soft cloth soaked in a neutral detergent diluted to approximately 1% concentration to clean, then rinse any remaining detergent with clean water. Clean the seat belts Use a soft sponge moistened with neutral soap or lukewarm water to clean the seat belt. Avoid using bleach, dyes, or abrasive cleaners. After cleaning, allow it to air dry naturally or wipe it with a

cloth or sponge. Avoid direct sunlight exposure. Clean the fabric and leather components Clean using only water and neutral cleaning agents.

Caution Dark fabric clothing, such as dark denim, may fade, causing discoloration of seat covers made from fabric, synthetic leather, or natural leather. Clean the display screen

Ensure the display screen is turned off and cooled down before cleaning. Use a microfiber cloth and clean the surface of the TFT/LCD display screen. Wipe the display screen surface dry using a dry microfiber cloth. Lamps Lamp fogging/frosting

External car lights adjust internal pressure via ventilation holes during operation. When humid air enters the lights and the lens temperature is low, fog may form, with frost possible under extremely cold conditions. Fogging of car lights is normal and does not negatively affect their operation or illumination. When fog forms, it creates a layer of fog beads on the inner headlight lens surface. These beads will eventually dissipate, but may reoccur during future use. Complete fog dissipation may take 2-3 days or longer, depending on ambient temperature, humidity, and vehicle light usage duration. If the following situations arise, it is advisable to consult or test at an authorized service center.  Large areas of water droplets or streaks accumulate on the inside of the headlight lens.  There is noticeable water accumulation inside the car lights.

200