C318-G User manual – MEA (English UI) (update changes appli

Maintenance and self-service

Danger Only tires and wheels matching the original vehicle's size and type should be used. Deviating from these specifications may compromise vehicle safety and performance, increasing the risk of accidents and injuries. Tire pressure check method 1. Remove the valve cap from the tire valve stem. 2. Measure the tire pressure using a tire pressure gauge. If the cold tire inflation pressure does not conform to the recommended pressure, adjust it accordingly. 3. Check the tire pressure. If over-inflation is present, depress the valve core inside the tire valve to decrease pressure. 4. Once check is complete, mount the valve cap on the valve stem to prevent dust and moisture intrusion, which can lead to tire leakage. Tire rotation To ensure even wear on front and rear wheels and extend operational time, it is recommended to rotate tires every 10000 kilometers following the first maintenance, adhering to the rotation pattern illustrated. If abnormal wear is detected, tire rotation should occur sooner than scheduled.

Post tire rotation, ensure both front and rear tire pressures and wheel nut torques meet specified standards. Warning! Failure to rotate tires promptly may lead to uneven tire wear. Replace the tires The original tires on this vehicle have been chosen to maximize performance, delivering optimal handling, ride comfort, and longevity. It is recommended to visit an authorized service center to replace original tires. Replacing radial tires with different sizes, load ranges, rated speeds, and maximum cold tire pressures, or mixing radial and bias-ply tires, will reduce the braking performance, traction, and steering precision of the vehicle. It is best to replace all four tires at once. If that is not possible or necessary, replace the two front or two rear tires in pairs. Replacing only one tire will severely impact the vehicle's handling.

212