C318-G User manual – MEA (English UI) (update changes appli

Maintenance and self-service

2. Mount the wheel trim cover: Align the positioning pegs of the wheel trim cover with the U-shaped notch in the center of the wheel, then press firmly on the center of the wheel trim cover until it is fully engaged.

Before driving, ensure the wheel trim cover is fully secured to prevent it from detaching. Replace the wheel. If the wheels are bent, cracked, or severely corroded, the tires may detach from the vehicle. Please replace the wheels promptly. Precautions for aluminum wheels  Be sure to use the wheel-specific nuts.  After disassembling or replacing wheels, check and verify that the wheel nuts remain tightened after driving for 1600 km. Requirements for wheel dynamic balance Before mounting new tires, complete the wheel dynamic balance calibration. If a tire is removed from the wheel, it must be rebalanced. If the total number of single-side hook-type balance weights does not exceed two and the total weight doesn't surpass 60g, and the total weight of single-side adhesive balance weights does not exceed 100g, the residual dynamic imbalance on one side after wheel and tire assembly should not exceed 5g. When mounting directional tires, ensure that the rotation direction of the tire aligns with the direction indicated on the tire mark.

219