F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Driving

Switching to Normal Speed ​Control WARNING Speed ​control does not apply brakes when you are approaching slower vehicles. Always be aware of the operating mode you have selected and apply brakes when required. You may switch from adaptive speed control to standard speed control using the information display. system indicator lamp shall be replaced with the normal speed control indicator lamp. Distance value is not indicated, the system does not automatically respond to vehicles in front, and automatic braking does not work. The system recalls the last setting you made when you have used your vehicle. If you select normal speed control, the adaptive speed control

Reason

Procedure

The radar surface inside the grill is dirty or covered with something. Radar surface is clean, but there is still a message on the screen.

Clean the grill surface in front of the radar or remove the covering object. Wait for a short period of time. It may take a few minutes before the radar finds out there is nothing in front of it. Do not use the system in such conditions as it shall not be able to detect the vehicles in front. Do not use the system in such conditions as it shall not be able to detect the vehicles in front. Wait for a short time or switch to normal speed control.

4

Excessive rain or snow blocks radar signals.

A message is displayed when the radar signals taken from the sensor are blocked by an object. The sensor is located behind the grill. When the sensor is blocked, the system cannot detect the vehicle in front, and thus cannot operate. Note: You cannot see the sensor, it is located under the panel. Keep the front of your car clean and do not keep metal badges or other objects on the vehicle. Vehicle front protectors and retrofitted lamps may also block the sensor.

Water, snow or ice on the road surface may block the radar signals. When you are in a desert or remote area where there are no other vehicles or road markings in your vicinity.

- 111 -