F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

ECAS (Electronically Controlled Air Suspension)

ECAS indicator interface Axle weight information shows the most correct information when the vehicle is at driving height.

down. These functions lower or raise the vehicle while the keys are pressed as it is in the control.

Front axle lifting system shall be deactivated when 30 km/h speed is exceeded and the vehicle shall automatically be adjusted to driving height. Operating Instructions for Front Axle Height Adjustment Mechanism (Only for Vehicles that the height of the 5th wheel is lowered) Ignition switch should be in position 2 to activate the air control system by the "Lifting Switch". When the front axle lifting switch is pressed, front suspension bellows start to raise the front chassis of the vehicle. While the system is active, on vehicles with Manual transmission: An audible warning signal with a gong sound is heard. On vehicles with an automatic transmission: An audible warning signal with a gong sound is heard and symbol is displayed on the indicators. When the rear axle lowered drive level control button is pressed, symbol is displayed on the indicator. Allows lowering of the rear axle that is taken to the drive level in manual control to lower the level of the 5th.

4

5. Check the warning colour when “ECAS warning active” message is displayed on the Display Screen. Error is critical and no ECAS function shall operate if the red warning is active. ECAS functions resume to operate manually or as limited as per the status of the error if the yellow warning is active. However, we recommend you to drive to the authorized service in both cases. Front Axle Height Adjustment Mechanism Front axle lifting system shall be deactivated when the ignition is switched off and vehicle shall be lowered to drive level. In this case, use care for the relationship of the parts of the vehicle approaching the ground with the surroundings.

If the lights of the ECAS control are not illuminated or it does not work, you may use the level adjustment function on the indicator until you drive to the service. To use the ECAS adjustment function on the indicator; 1. Enter the ECAS adjustment screen using the direction 2. Press the OK button to enter the adjustment screen. 3. Press OK button again to bring the vehicle back to the driving height. 4. Use navigation keys to select raise or lower height expressions and keep “OK” key pressed to move the vehicle up or

- 137 -