F-MAX-USER MANUAL-FULL BOOK-ENGLISH

OPERATION

Seats and Beds

Back angle adjustment To adjust the back inclination angle while sitting on the seat, desired position is obtained by pulling the lever on the left of the seat upwards and moving your back forward or backward. Quick back tilting adjustment Move the lever on the inner upper area of the seat clockwise in order to adjust the quick back tilting function. Seat belt height adjustment Height adjustment of the seat belt may be adjusted at 4 levels by moving the belt up or down by pressing and holding the button. Maintenance Dirt may hinder the operation of the driver seat. Keep your seat clean to prevent this! CAUTION There is a risk of injury if the backrest bounces forward!

Do not use the seat heating function to dry the seat fabric it it is wet. Do not try to push the seat bellow with your hand as it may cause a risk of injury. General cleaning notes Dirt may hinder the operation of the driver seat. Therefore, apply the required care for cleaning of the seat and keep your seat clean. Do not try to push the seat bellow with your hand as it may cause a risk of injury. Do not try to remove seat fabric while cleaning the seat. Bedding may be removed for cleaning of the bed. The cleaning instructions on the mattress cover shall be followed. When cleaning the fabric or the plastics of the seat, the bed and the seat belts, apply the cleaning material to a small area first to test the suitability of the material. Do not use flammable or abrasive cleaning materials. Do not use high pressure cleaners to clean your seat, bed and the seat belts.

WARNING Discharge the air by pressing the rapid lowering button when you are getting off the vehicle. This would increase the service life of the seat mechanism. CAUTION If the seat is used without air charge, this would damage the internal mechanism of the seat and render the seat out of warranty cover. Adjustment of the seat while driving may cause unwanted steering movements and injuries. -Adjust the seat when the vehicle is stationary only. -Adjust the seat when you are sitting on the seat when there is no one in the setting range of the seat. General safety notes Do not keep cutting, piercing tools or items on the upper and lower beds, on the seat and in the side pocket of the seat so that the items do not cause damage inside the cab when the cab is tilted to the front.

4

- 75 -

Made with FlippingBook - Online magazine maker