S05_G_ASE_LHD_EV_English_15AUGUST

Travel Preparation

Replacement of Battery

1. Lower housing

2. Circuit board

3. Decorative rings

4. Rear cover

5. Upper housing

6. Battery

As shown in the figure, the smart remote control key consists of 6 parts.

Battery replacement steps:

1. As shown in the figure below, pinch the back cover with your fingers from both sides of the key, pull it down, remove the back cover, and then remove the key decorative ring.

2. As shown in the left figure below, use a hard, thin metal sheet (or rod) to reach into the position indicated by the arrow in the left figure below and pry open the upper and lower shells.

9