S05_G_ASE_LHD_EV_English_15AUGUST

Travel Preparation

3. Remove the circuit board and take out the battery for replacement.

4. After replacing the battery, install the circuit board, buckle the upper and lower shells, put on the decorative ring and buckle the back cover.

CAUTION

• Do not touch the circuit board, as this may generate static electricity and damage the circuit board. • The positive and negative terminals of the battery must be installed according to the correct markings, otherwise the circuit board will be damaged. • The new battery shall be of same specification with the original battery (3 V, CR2032) of the remote control. • It is easy to damage the circuit board with improper operation during battery replacement; it is recommended to contact an authorized dealer for replacement. • If the smart remote control key is placed together with mobile phone, laptops, tablet computers and other objects containing batteries or metal, there may be a risk of induction unlocking failure. • The battery operating environment is - 20 ℃ ~85 ℃ , the key will become ineffective outside the temperature range.

PEPS System

Conditions Affecting Function of PEPS System

The keyless system may not work properly in the following situations.

10