S05_G_ASE_LHD_EV_English_15AUGUST

Vehicle Driving

Front/back wide - angle view switching

In the panorama + front / rear view, clicking on the single - view area allows you to switch to the corresponding direction's single - view large image. The single view large image provides a wider field of view. Click the single - view large image again to switch back to the corresponding panoramic + single view.

Parking guide line

In the panorama + front / rear view, both the panoramic view and single view will display guide lines.

• Warning line: Extends about 20 cm beyond the vehicle's tires.

• Wheel track: Shows the vehicle's tire movement path.

• Safety line: About 50 cm from the vehicle body.

When the steering wheel is turned, the dynamic guide line will rotate with it, and the guide line is the estimated vehicle trajectory. When the steering wheel is centered, the dynamic guidance lines will be hidden.

3D view switching

Click the 3D view button to switch to 3D mode, click the 3D controls around the car model or slide the car model to switch to the corresponding 3D perspective.

Setting

In panoramic mode or single view, click the setting button on the right side of the central control display to make corresponding settings for the guide lines, turn signal lamp triggered panoramic view, radar triggered panoramic view, steep slope vision assist, and transparent body (transparency can be adjusted after turning on the function) functions.

Transparent body

The transparent body function refers to the panoramic system's ability to recall video information of areas previously driven over. When the vehicle is above a previously driven surface, the panoramic view can dynamically display the road image beneath the vehicle. If the vehicle is in motion, the recorded video will refresh dynamically according to the speed. If the vehicle transitions from motion to a stop, the recorded video will be saved until the panoramic system exits.

146