S05_G_ASE_LHD_EV_English_15AUGUST

Vehicle Driving

Detection area

Working conditions

After the vehicle stops, it will work under the following conditions:

1. The vehicle is powered on and doors are unlocked.

2. The vehicle is powered off within 5 minutes and doors are not locked.

IACC troubleshooting

In the following cases, the central control display will display "Rear assist system abnormality" and the warning indicator on the exterior rearview mirror will remain on:

1. There is a fault with the radar sensor;

2. Other associated controller failures;

3. The position of the radar sensor is changed by external forces such as impact, and the installation position is beyond the normal working range of the radar. In the following situations, the central control display screen displays "Rear assist radar blocked" and the warning indicator on the exterior rearview mirror will remain on: 1. The radar sensor is covered by mud, ice and snow, modified/added accessories, stickers, etc. If the radar is blocked, please remove the added parts or stickers at the radar sensor. If you drive on muddy roads for a long time, you can try to wash the inner and outer surfaces of rear bumper at the radar sensor. Please keep the sensor and the surrounding area clean at all times. If the system fault message persists, please go to a Changan Automobile authorized dealer for inspection.

CAUTION

Each time the vehicle is powered on, the outside rearview mirror warning indicator will light up. If it goes out after 3s, it means that the system is normal.

162

Made with FlippingBook flipbook maker