S05_G_ASE_LHD_EV_English_15AUGUST

Vehicle Driving

After the ELK function is turned on, when the vehicle speed is greater than the system operating speed of 60km/h, the system enters standby mode. If the sensor recognizes lane lines on both sides and the vehicle deviates from the lane and there is a risk of collision with the "oncoming vehicle" or "rear vehicle", or if the vehicle is in danger of colliding with the road boundary guardrail, the system will intervene briefly to correct the vehicle's driving trajectory.

WARNING

The driver should always take full responsibility to control the vehicle correctly and keep it safe.

• The system will not provide continuous steering assistance. When the system performs assisted steering, the driver should immediately correct the vehicle's driving trajectory to ensure driving safety. • In system - restricted conditions, such as rain/snow/fog/dust weather, poor visibility, etc., assisted steering may not be triggered or may be triggered incorrectly. Do not use it under system - restricted conditions.

IACC troubleshooting

When the front - view camera, side millimeter - wave radar or related systems fail, the corresponding ELK function will be unavailable. Please refer to the troubleshooting methods for the LCDA system and LDW system for inspection and repair. If the malfunction cannot be resolved, please go to a Changan Automobile authorized dealer for handling.

The Speed limit sign Recognition (TSR)

Function Overview

Speed Limit Sign Recognition (TSR) shares a camera with Lane Assistant System (LAS) to detect speed limit signs on/beside the road and display them on the central control display screen, helping the driver to observe speed limit signs on the road and alerting the driver through sound and image alarms when the vehicle speed exceeds the value on the recognized speed limit sign.

164