S05_G_ASE_LHD_REEV_English_15AUGUST

Maintenance and Self-service

8. Lift the vehicle. Combine the jack, jack handle, and wheel wrench as shown in the illustration above, and turn the jack clockwise to raise the tire slightly off the ground.

CAUTION

To lift the vehicle, it is only allowed to use the jack provided together with the vehicle, and please always choose the right lifting position. If the jack is used in an improper way, the vehicle may roll over after it is lifted.

The jack must be placed directly on the solid, flat and anti-skid ground.

Don’t use wooden blocks or similar objects as support for the jack, otherwise the jack cannot reach its load-bearing capacity due to height limitations.

Make sure the tire is at most 3cm away from the ground.

9. Remove all wheel nuts and remove the tire.

CAUTION

When placing the tire directly on the ground, ensure that the rim side is facing up to avoid damage. Before installing the spare tire, it is advisable to place the removed tire underneath the vehicle to prevent the jack from shifting and causing an accident.

10. Mount the spare tire and tighten each nut with approximately the same force, ensuring that the nuts are in full contact with the wheel mounting surface. Be

206